- Over Voltage Protection
- Surge Protection
- Short Circuit Protection
- 3 Pin Power Cord
NETSTAR NET MODEM (PoE Injector) is used to power Variety of Netstar Switch and other CPE (24V, 0.75A). NETSTAR PoE Injectors provide variety of features like Surge Protection, Overload & Short Circuit Protection.
|Ethernet Connector||Metallic RJ45 Jacks (2 Ports) 10/100 Mbps|
|Input Voltage||100-240AC @ 50/60Hz|
|Output Voltage||24 VDC|
|Network Cable||4-pair UTP/STP Cat 5 cable|
|LED||Power: On/Off for PoE Injector|
|Power Cord||3 Pin Power Cord|
|Power Over Ethernet Injector: Power Supply (IN)||Power over Ethernet 24V @ 18W on Spare Pair (to supply power to the Netstar switch as well as a compatible PoE device (e.g. CPE))|
|No. of Ethernet Ports that can
Power ON the Switch and CPE
|Anyone/All of the seven Downlink Ports|
|Power Over Ethernet||Power over Ethernet Injector on Four Pair Cable|
|CAT-5 Cable Data Lines||Pair 1: Pins 1/2 , Pair 2: Pins3/6|
|CAT-5 Cable Power Lines||+ VDC: Pins 4/5 , -VDC: Pins 7/8|
|Power consumption||5 Watt (PoE Injector)|
|Operating Temperature||0° to 50°C|
|Storage environment||0° to 75°C|
|Operating Humidity||20% to 95% (non-condensing)|
|Dimension||66mm x 118mm x 40mm|
If for any reason, PoE Out port cable is shorted / water ingress in PoE OUT Cable going to Wireless CPE, Heavy current may flow in PoE OUT Port.
Provided Over voltage protection on each PoE IN Port.
Each PoE IN port is feeding Power to the Power management circuit of the switch.